Our products are intended to be used by responsible persons.  Please review the safety information below.  Products are not intended to be used by or left in the control of children and young persons. 

Please take steps to review the product CLP information labelling.  This information details the Product Identifier (usually the Fragrance), applicable Allergens, Warnings, Hazard and Precautionary information.  It may also carry warning Pictograms.  All our CLP information carries Unstable Melts contact details, including address and telephone number.  This telephone number can also be used for emergency and general queries.

CLP information is a legal requirement! All our products carry the appropriate labelling.

 

Wax Melts

• Remove wax from the packaging or container
• Wax melts should only be used in appropriate wax melt burners.
• Add one piece of the wax melt at a time until the required fill is reached.
• Do not over fill the wax melt burner initially as wax will spill over.
• If wax remains in the burner bowl after use and you wish to remove it, wait until the wax cools and hardens, then apply a small amount of gentle pressure on one end of the wax until it pops out.
• Unlike candles, the wax in melts will not evaporate.
• Do not use metal or sharp objects to clean out wax as this may crack or damage the burner or cause injury.
• You may, re-use the wax several times until the fragrance has completely dispersed.

Wax Melt Burner (non-electrical)

• Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts and tea lights. Not intended for use with fragranced warming oil or potpourri refresher oil.
• Remove all packaging before use.
• Only use with a good quality tea-light. Do not use with a maxi tea-light, votive or other candle.
• Never leave a burning candle unattended or move it when lit.
• Keep the Wax Melt Burner and tea-light out of the reach of Children and Pets.
• Do not burn the tea-light or leave the wax melt burner on or near anything that can catch fire.
• Ensure the wax melt burner is well ventilated. There must be sufficient space above the flame within the wax melt burner.
• Keep foreign objects out of the wax pool.
• Remove any carbon build up within the wax burner.
• The wax melt burner becomes VERY HOT during use, do not touch or move whilst alight or whilst wax remains molten.
• Extinguish the tea-light if the flame becomes enlarged, makes contact with the wax melt burner, or begins to smoke.
• Use a candle snuffer to extinguish the flame. Once extinguished allow wax melt burner to cool before moving.

Directions for Use

• Place the wax melt burner on a level, flat, cool, heat resistant surface away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the wax melt burner is used without a protective plate, tray or similar product.
• Position the wax melt segment on the top bowl of the wax melt burner.
• Insert a good quality tea-light in the bottom base of the wax melt burner.
• Allow the heat of the tea-light to melt the wax and our signature fragrance will release into the room.
• The wax melt burner will become VERY HOT while in use, do not touch while in use, heated wax can cause burns. Allow the burner to cool completely before touching or moving.
• Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst a tea-light is still lit. This could cause the wax melt burner to scorch and (or) smoke.
• If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, apply a small amount of warm water to soften the wax and then whilst using protective gloves gently place pressure on one end of the wax to pop the wax out.
• Let the wax melt burner completely cool before re-use.
• DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX.
• DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER.
• DO NOT PLACE THE BURNER IN A FREEZER.
• WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE.  USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.

Electric Wax Melt Burner

Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts. Not intended for use with fragranced warming oil or potpourri refresher oil.

•  Never leave an electric wax melt burner unattended whilst in use.
• Remove all packaging before use.
• Keep the electric wax melt burner out of the reach of Children and Pets.
• Do not leave the electric wax melt burner on or near anything that can catch fire.
• Ensure the electric wax melt burner is well ventilated.
• Keep foreign objects out of the wax pool.
• The electric wax melt burner becomes VERY HOT during use, do not touch or move whilst turned on or whilst wax remains molten.

Directions for Use

• Ensure the wiring cord and appliance are free from visible damage, check the rating of the installed fuse and wattage of the lamp.
• Place the electric wax melt burner on a level, flat, cool, heat resistant surface away from other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the electric wax melt burner is used without a protective plate, tray or similar product.
• Position the wax melt segment on the top bowl of the wax melt burner.
• Plug in the electric wax melt burner and switch it on.
• Allow the heat of the lamp to melt the wax and fragrance will release into the room.
• The electric wax melt burner will become VERY HOT while in use, do not touch while in use, heated wax can cause burns. Allow the burner to cool completely before touching or moving.
• Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst the electric wax melt burner is switched on. This could cause the electric wax melt burner to scorch.
• Switch off the electric wax melt burner and unplug from the mains when not in use.
• If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, then whilst using protective gloves apply a small amount of gentle pressure on one end of the wax to pop the wax out.
• Let the electric wax melt burner completely cool before re-use.
• DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX.
• DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER.
• DO NOT PLACE THE BURNER IN A FREEZER.
• ELECTRIC WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.